Wire-Hung Awning Track Extension Bar 48"
DIY Kit
SKU: 126966
Wire-Hung Awning Track Extension Bar 48"
DIY Kit
SKU: 126966
Summary
Use this extension bar as a riveted joint to connect multiple awning track pieces.
Jump To:
You May Also Like
45-Degree Awning Track Anodized Aluminum
#126092
Sewable Keder Rail Track Black
#126874
Sewable Keder Rail Track White
#126873
Awning Track Flanged White
#103334
Awning Track Flanged Black
#121871
Flex-A-Rail Black
#127027
Flex-A-Rail White
#103355
45-Degree Awning Track Milled Aluminum
#126958
Heavy Duty 180-Degree Awning Track Anodized Aluminum
#126984
End Cap for Awning Track (2 pack)
#127018
End Cap for Awning Track White
#127020
End Cap for Awning Track Black
#127019
Description
Use this extension bar as a riveted joint to connect multiple awning track pieces. The 48" extension bar can be cut to the recommended joint length of 8" with a hacksaw. Each 48" piece will create six riveted joints. After cutting to 8", each extension bar should have 1/8" holes drilled (through both the extension bar and awning track) and be secured with two rivets at each end of the joint. The package includes 30 aluminum blind rivets for installation. A rivet installation tool is not included.
Specifications
Specifications
| Brand | Unbranded |
|---|---|
| Hardware Material | Aluminum |
| Length | 48" |
| Width | 3/4" |
Dimensions
Dimensions
Wire-Hung Awning Track Extension Bar 48"
| A. | .940" |
|---|---|
| B. | .188" |
| C. | .563" |
| D. | .750" |
| Total Rail Length | 48" |
| Front | |
|---|---|
| A. | 1.57" |
| B. | 0.40" |
| C. | 0.122" |