Sew it yourself! This California Dodger Skin Kit for a 2-Bow Frame contains all the materials needed to sew the fabric portion of a California dodger, including 60"-wide Sunbrella® Marine Grade Fabric. Skin kits can be used to replace the fabric on an existing dodger frame or can be paired with our 2-Bow Dodger Frame Kit (#121918) to create a new, custom California dodger from start to finish. Dodgers, also known as sprayhoods, protect from the sun and offer shelter from rain and spray.

California dodgers differ from traditional dodgers in two main ways:

• The side windows on a California dodger are larger than those on a traditional dodger.
• The front and side windows on a California dodger are removable; only the front window on a traditional dodger is removable.

The Sailrite® California Dodger Skin Kit is intended to be used with frames that use rigid support struts (included in our Dodger Frame Kit). Webbing and webbing strap hardware are not included.

California Dodger Skin Kits do not include frames, fittings or rigid supports; those are sold separately or as a complete set in our 2-Bow Dodger Frame Kit (#126148).

This kit will accommodate a maximum frame width of 84" and a nominal height of 40" at its maximum spread with a maximum length fore and aft of up to 70" (includes the front window panel to the deck).

Please note: This skin kit should be assembled using the instructional video found in the image carousel above. Written instructions are not provided.

Note: This item is nonreturnable.

Recommended Needle Size: #18-#20

Kit Includes:

• Sunbrella® Marine Grade 60" Fabric (select color from drop-down menu) - 8 yds.
• Acrylic Bias Binding Tape - 160'
• Tex 90 UV Bonded Polyester Thread 4 oz. (1,350 yds.)
• Lenzip® #10 Single Locking Pull 84" Finished Zipper (Molded Tooth) - 2
• Lenzip® #10 Double Locking Pull 96" Finished Zipper (Molded Tooth)
• Lenzip® #10 Double Locking Pull 48" Finished Zipper (Molded Tooth) - 4
• SNAPCAP® Top Stop #10 Plastic Zipper (Molded Tooth Chain)
• Polyester Hook - 10'
• Strataglass™ 30 Gauge Vinyl Window Material 54" x 110" Clear (2 pack)
• Dura-Skirm® Patterning Material 74" - 10 yds.
• Seamstick 1/4" Basting Tape for Canvas & Upholstery (36 yds.)
• Seamstick 3/8" Basting Tape for Canvas (50 yds.) - 2
• DOT® Snap Fastener Cloth-to-Cloth Stud (Stainless Steel) - 10 pack
• Shelter-Rite® 61" Fabric - 1 yd.
• Filament Strapping Tape 3/4"
• Leather 4-5 oz. Chrome Pearl Grey
• DOT® Twist-Lock Fastener 2 Screw Stud Cloth-to-Surface Set (Nickel-Plated Brass) - 10 pack (2)
• DOT® Twist-Lock Fastener Double-High 2-Hole Screw Stud (Nickel-Plated Brass) - 10 pack
• DOT® Twist-Lock Fastener Extended Legs Eyelet (Nickel-Plated Brass) - 10 pack
• DOT® Snap Fastener Cloth-to-Surface Set 3/8" Screw (Stainless Steel) - 10 pack (3)
• Trimmable Butyl Tape 1" 
• Samples Boat Blanket 72" Fabric - 2
• Blind Rivet for SnapRite® Surface Die (Stainless Steel) - 10 pack
• Sailrite® Woven Sew In Tags - 2 pack

Required Tools (Not Included):

• Sewing machine
• Scissors
• SnapRite® Surface Mount Stud Die #103754

Reference end of instructional video below for additional recommended items.